Presea - Boots, Gloves & Armour - Tales of Symphonia

Salutations! After years on the shelf, I would like to continue to take a look at how I made my Presea costume! Look here for a blast from the past: how I made the Dress and Wig! Seriously, I was posting about this in 2013 what-the-heckaroonie.

Getting this costume photoshoot worthy and documented is one of my 2016 goals and I'm pleased to say that with the costume and photoshoot done I can now finish documenting how I made it. From the depths of my computer hard-drive I have salvaged ye ancient progress photos.

Possibly the most challenging part of this costume and the main reason I put this costume on hiatus for a whole year (the other reason being my dog ate the tip off my battleaxe). This was my first time making boots, gloves and armour, and to be honest I had no idea what I was doing! I didn't get very far before I gave up. When I came back to this project a year later it was after I had done the armour for my Asuna costume and had much more sewing/patterning experience.

I started by buying and deconstructing a pair of well fitting costume gloves, from this I was able to make my own glove pattern. I made it go extra wide further up the arm so that it would be loose at the cuff.

My main problem was that the character's gloves are above the elbow, but loose fitting, meaning they essentially float there defying the laws of physics. My trouble was making them stay up without any seriously visible rigging...

It took hours of hand stitching to assemble those gloves. Above is the separate thumb piece which was slotted into the glove.

Left is my first attempt at making the boot covers, as you can see the cuff looks kind of wonky... Partially due to my inexperience working with stretch fabrics. This is where I stopped working on them for a year.

I patterned my boots to cover a cheap pair of canvas shoes I picked up at Ardenes. Above is the toe cover, left is the 2nd attempt at the boot cover. (from the inside)

I opted this time to do a fold-over cuff, which looked much cleaner, even though it isn't as accurate to the original design.

I replicated the cuffs on the gloves.

I marked where the shoe cover would be sewn to the shoes, then I hand stitched the two together. It took a while, but the result was a nice clean finished edge.

Then I sewed elastics to the inside so that the loose gloves and boots would stay up. These had to be far enough away from the edge so that they would be hidden inside. How I made the cuffs stay up was I sewed some short pieces of wire into the boot cover where it attached to the cuff.

At one point I had attempted to wire the whole boot, but I found it a) really uncomfortable, b) hard to keep it secure and c) it would be harder to pack into a suitcase, because the boots would have to remain upright. That and every time the wire got dented they were even more uncomfortable to wear... With the short wires only at the cuffs with fabric casings they were easy to fold up, and didn't cause any discomfort.

Next I got to work on the small bits of armour, following the same method as I did for Asuna. I used the leftover styrene from that costume to construct the toe and hand guards.

First I made paper patterns of the shapes I wanted, then traced them and cut them out. There were 8 pieces total. Compared to Asuna's this armour was total cakewalk.

I then made the raised bits out of craft foam, and hot glued them on.

I used the same spray paint treatment as Asuna's: primer, matte black, then silver.

I weathered with sandpaper, glued all the pieces together, then aged them with black dry-brushing.

Lastly, the shoe armour was hot glued to the boots (while I was wearing them, so the armour placement would be correct). Then I rigged the hand guards with some elastic so they would be easy to take on and off. I painted the elastic grey so it would match the gloves.

Overall this project really benefitted from me not rushing to finish it the first year and instead applying another years' worth of experience to finish the job.

Vaporeon Gijinka - Sandals & Accessories - Pokémon

The 6th and final instalment of my Vaporeon building quest: Sandals & Accessories! This costume was all about the details and finishing touches. Beading, painting, trimming, gems, accessories, props--all elements that helped give this costume the extra wow-factor. It's not often I break a costume down into 6 posts, but this one is certainly worthy of that.

Links to Part 1: Bolero, Part 2: Under Layers, Part 3: Wrap Skirt Tail, Part 4: Wig & Hairpieces, and Part 5: Wraps & Bracers!

Thanks to Elemental Photography for the fantastical photoshoot! Credit for the original costume design goes to Cowslip!

Firstly I would like to thank my friend Harriet for lending me her fan! She does Chinese fan dancing and allowed me to borrow hers for this shoot. Thanks muchly!

For the sandals I started by buying a plain pair of cheapo flip flops from Ardene's. Which is a great place to buy shoes you don't care about.

I patterned my base cover shape out of paper, then cut out my pieces (making sure they were mirror images) in leather. Using acrylic paint, I painted these leather pieces navy blue to match the costume.

These pieces would wrap under the bottom of the shoe, with a single seam in the top. The long tails would be used to make a buckle strap around the back of the heel.

Once I was happy with the fit, I machine stitched that top seam.

Next step was to create ruffle bit. Using leftover navy fabric from the bracers I created the two pieces. Each is made of two layers, sewn right sides together along the outer edge, then flipped inside out and top stitched. 

These were then gathered and stitched onto the top of the leather part of the sandal. I also tacked them down with a hand stitch in a few places on the outer edge, because the fabric was super stiff and didn't want to lie flat. 

Next I sewed a buckle into the back of each and punched holes to finish the closure. 

The last step was to glue the leather piece to the sole of the shoe to keep it in place/stop it from rotating. I used e6000 to glue it and it worked quite well. 

Another step in the detailing process for this costume was creating the gems for the center front and the edge of each bracer. 

I sculpted them using apoxie sculpt and then I painted them using a few different shades of nail polish. I did a splotchy application of my dark blue and light teal. And then went over that with a translucent shimmery blue, before finishing it off with a coat of clear gloss.

I applied the same paint to my toenails later! Details are important!

All of the gems were glued onto the costume with e6000. 

My last accessory was a brooch I created for the front of the costume. It was based on the very faint squiggle in the illustration. I got to interpret it how I wanted and this was the result. (I think I sewed beads to  the center later?)

Overall I am very satisfied with how this project turned out, and look forward to starting my next complicated fancy project.

Once again thanks for all your support! Now that this is done I can move on with my life! Hooray!

Sakura - Wig, Hat & Accessories - Cardcaptor Sakura

Part 3 of Sakura (1st Opening outfit)--lets talk accessories! The details are really what make this costume. If you want to see how I made the wings, go here! If you want to see the rest of the outfit, go here!

I entered this costume in the Friday night Workmanship Competition at Anime North in 2014 and won an award for Best Accessories in my category. That was pretty cool. It was my first (and so far only) time entering in a competition without a stage presentation component.

Once again, thanks to EleventhPhotograph for the photoshoot. I really love this black and white shot.

First we'll talk about the wig. I started with EpicCosplay's Aura in cocoa brown. I think this colour works really well for Sakura, it's not too brown or too blonde. It's almost a bit reddish. I think the colour works well on both my sister and myself.

Since I was doing a costume of hers with a hat, I didn't bother to add her iconic pigtails that she normally wears, because they wouldn't be visible. This has influenced my costume choices for my subsequent Sakura costumes to only be ones where Sakura is wearing a hat. Because this means I don't have to go back and fix the wig. And also because her costumes with hats are ridiculously cute.

As you can see the wig was pretty long. I purposefully picked a longer wig because she has those two small sections of longer hair in front of her ears. It is much easier to cut a wig shorter than it is to add in longer wefts.

I started by trimming the bangs. Using clips I separated off the different sections of the hair. The longer pieces were separated from the sides and the bangs. I left the long wisps at the original length, and simply thinned them out a bit. The sides were thinned and layered and trimmed to length. Then I trimmed the back of the wig.

The last step was to style the front of the wig to give the top that volume. I pulled sections of the hair up and hair sprayed them at the base. Then I used a blow dryer to set it. I made some shorter bits stick up while the rest parted and fell to each side. This created the look of her cute bob at the front.

Next I started work on the hat. Since I had very limited pink fabric left, I made a mockup. The hat's construction was pretty simple. The pattern consisted of a circle and a rectangle. The rectangle was the length of the circle's circumference.

First I rolled over the channel where the elastic would go later and ironed that. I didn't stitch it down yet, but pre-ironing saved me a ton of headaches later.

The next step was to sew the rectangle to the top of the hat, right sides together. Then I sewed the two ends of the rectangle together and then top stitched the channel for the elastic. I left an opening in the channel so I could feed the elastic through. The elastic both gathered the hat and helped it to stay on. When I was satisfied with the fit, I sewed the elastic ends together and closed the channel opening.

Lastly the bow was attached to the hat. Credit for completing the finishing touches goes to my friend Alli who handcrafted all the bows and hand stitched them on.

Instead of constructing socks and gloves I bought them, and made ruffles to add to them to help them match the rest of the costume.

Like the hat band, the ruffles are simply rectangles with a channel on on side for an elastic, which cinches them to fit and gathers them into a ruffle. These were tacked on to the gloves and socks.

Little red bows were also added to the gloves.

The shoes were an extremely lucky find. I managed to find flats at Ardene's in the perfect shade of red. They matched my red fabric perfectly. I added the bows to the toe. This is not 100% accurate to the design, but I didn't feel like adding straps to the shoe--I was worried it would make them uncomfortable. The bows were hot glued on.

I paid attention to the details so that everything would match perfectly. I wanted to do Sakura justice, and I think I achieved that. :)

Inkling - Outfit & Accessories - Splatoon

This is the first post on our Splatoon Squad--affectionately referred to by the group as "Squids or Kids?". What was supposed to be a group of easy casual cosplays quickly snowballed into a crazy colossal effort to make the most awesome Inkling costumes possible. Special thanks (and photo credit) to Elemental for doing the group photoshoot! All of the pics from the shoot were wonderful!

The current group from the photoshoot consisted of: Brian (Ragz Cosplay) --the brains of the operation; Andy (Yavarice) --our task manager; Michelle (Mage Cosplay) --a heat n' bond wizard; Kim --the only one who can actually has the power to create vector files; and myself--the squid hat pioneer. Special thanks also to our fellow squids--the wig expert Louise and magical wizard Adrien--for all their hard work as well! We look forward to them joining us for Squids 2.0. :) There will most likely be a second shoot at some point in the future, with even more Kids. Or Squids?

Obviously since this is a large group cosplay there is a certain amount of tasks that were shared or delegated so that everyone's costume would match! I will do my best to generally explain how things came together, but obviously credit goes to the individuals who made each specific thing!

For the clothes we all set about creating our own outfits. I tried to keep the base items I bought on the cheap side.

Since the Inklings all wear a standard pair of black biking shorts with a stripe their team colour down the side, we all found black leggings/bike shorts to modify.

For my shorts, I bought a pair of black leggings at Ardenes for about $10. I marked how short I wanted them, then cut off the excess. I topstitched a stripe of green spandex down the side of each leg using a zig-zag stitch--so it would allow the fabric to stretch. Then I hemmed the pants.

We all opted for t-shirts in varying colours with one of the various logos from the game on them. In the game the clothes you can buy have different brands to choose from, and each brand has a unique logo. For those of us who decided to create our logos with heat transfer paper, Kim vectored and resized the designs. Those of us with inkjet printers printed the logos onto heat transfer paper. (Which I believe was purchased at Michael's?) Those were then applied to the shirts using an iron.

I bought my t-shirt in chinatown for $2. I think other people bought theirs at Walmart. I also got a green hoodie at H&M to match my costume--in case it was cold. Brian layered his shirt over a long sleeved shirt.

For the coloured tags on the shirt we each used a rectangle of our own team colour fabric and used a small version of our logo applied with heat transfer paper. Then we used heat n bond to attach the tags to our shirts.

Mage actually created her adorable squid shirt logo entirely with heat n bond to appliqué the design on in the different coloured fabrics pieces. I think it turned out really awesome! She also made several of the simpler tags (like the one on my hoodie) in this method. She is a heat n' bond wizard.

Accessories allowed us to personalize the costumes a bit more. We looked like a cohesive group, but the accessories gave our characters personality. For example: Andy wore goggles, Kim had headphones, Michelle had hair clips, and Brian wore glasses and a headband. In a lot of cases, we would find a colourful item for cheap and then slap a logo on it. Hahaha

For shoes, I got a pair of $14 high tops at Ardenes that I stenciled a logo on using fabric paint. I tried to make my accessories have a colour theme--which was pink. We had a group field trip to Walmart one night to pick up some accessories. We got some packs of brightly coloured shoe laces there, so I was able to swap out the boring white ones that came with my shoes for a pair of neon pink ones! Other members of the group picked up their brightly coloured running shoes at Walmart. I don't think anyone spent more than $30 on shoes.

I picked up a pair of bright pink headphones in chinatown for about $20. So I wouldn't have to worry about making any pointed ears for the costume, which we made a group decision later to forgo anyway. I wish the headphones I bought were a little bigger, but I wasn't willing to spend any more on them. I may mod them at some point. Perhaps for Squids 2.0?

The masks were our solution to not having to paint large areas of our eyes black. A friend of of the group put together an easy superhero mask tutorial, which you can find here! These masks are lightweight and can be spirit gummed directly to your face, or tied on. Andy made my mask for me, and it looks awesome, but unfortunately the felt backing seems to irritate my eyes a lot. :( I am going to look into alternative materials to make the same thing, because I really liked the look of the costume with the mask. Next time I am definitely going to fill in the area around my eyes with black makeup, though.

Stay tuned for part 2!