Thursday, April 25, 2013

Greyscale Checked Jumper

So it's my mum's birthday today! This post is in honour of the incredible woman who took the time to teach me how to sew, puts up with my crazy cosplay antics, supporting me in my hobbies and through life in general! An incredible lady! And also very stylish! :D

People say we look the same, I am inclined to agree?

This post is of a jumper I made 2 years ago. 2 years late, but better late than never! ;D

(And back to regular posting hopefully!)
This is a Christmas present I made for my mum. An original design of a jumper. I patterned it myself from scratch. :D

Using a fabric that had a pattern on one side and a solid on the other, I decided which parts I wanted to be checked, and which ones I wanted to be grey.


I cut out my fabrics, accounting for seam allowance.

The checked shoulder piece I cut 2 of, so I could sew it inside out and then reverse it to get clean edges. This made sewing it onto the garment much easier.

That's the before and after of when I reversed it. You can see below how it looks on the garment where it drapes over the shoulder.

I sewed up the side seams, knowing I would have to take the left one out later to put in the zipper. That seam I basted.





After ironing my shoulder piece, I pinned it in place to see how it would look.
I tried to zig-zag the edges of the fabric, which was really thick and would not cooperate for a double rollover seam, but that didn't work very well, and neither did the single rollover seam...

So I scrapped that idea and applied a black bias tape to the edge.

Then I pinned and sewed my shoulder piece into place.



I also folded over a piece of bias tape and sewed that together to create my button loops.

I measured where my buttons would go and marked those spots with a pin.

And now the neckline is finished! :D


The next bit was the bottom piece that would incorporate a pocket into the design. I cut the large triangle twice so I could turn it inside out to finish the edge in the same way as the shoulder piece.

I made it large enough so it would wrap around to the back of the garment.

Sewing it on was terrible. With this many layers, the sewing machine just barely made it through!

I added the topstitching on the pocket opening so it would match where I stitched the other side to the garment. Then I added buttons and loops.

Lastly was the zipper, which I affixed in my usual fashion.